Origin |
Korea |
Model Number |
MNS202 |
Pro Series Network Video Server MPEG4/M-JPEG Dual Mode, 2 Way Audio, PoE, NTSC/PAL
Description
The Webview Pro Series Network Video Server digitizes analog video and then transmits the signal across an IP network - such as a LAN, intranet or internet. This allows you to take your first step in implementing an IP-based system without having to install new network cameras.
Remote Viewing and Management The Pro Series Network Video Server allows users to view equipment and facilities anywhere there is a networked computer and to manage camera control such as pan, tilt and zoom.
Supports diverse protocols The Pro Series Network Video Server allows remote control by using diverse protocols such as Pelco-D, Pelco-P, etc.
Flexible Video Formats The Pro-Series Network Camera supports MPEG4 as well as JPEG video formats, providing superior quality and at the same time continuing to support existing applications (the law in most countries only accepts JPEG video format as evidence in court). MPEG4 on the other hand, allows you to transmit a larger amount of data over the same amount of bandwidth, while providing smooth and seamless viewing.
Bi-directional Audio Support Attaching a microphone and loud speakers to the Pro-Series Network Camera will allow you to listen and talk using the 2-way audio support. This is ideal for most security and surveillance applications but can be applied to provide cost effective video conferencing as well.
Power over Ethernet The Pro-Series Network Camera supports the 802.3af standard, allowing it to be installed in locations where an AC power source is not readily available. Simply plug the camera into a PoE compliant switch, and begin transmitting power as well as data over the Cat5e or Cat6 network cabling.
Features
- 1 analog video BNC input, 1 analog video BNC loop-through port
- Supports MPEG4 and Motion-JPEG image compression
- Video stream up to 30 (NTSC) or 25(PAL) frames per second
- PAL/NTSC video auto-detection
- Integrated motion detection with pre-and post-alarm image/video buffering
- Event-triggered FTP and email upload of still images and videos
- Audio support, full duplex, up to 3.4kHz
- Terminal block for external sensors or external alarm devices
- Supports IEEE 802.3af Power over Ethernet injectors, mid-and endspans
- Supports Pan/Tilt/Zoom CCTV cameras
- Supports MPEG4 video streaming with CBR(constant bit rate) and VBR (variable bit rate) modes
- Controllable frame rate
- Integrated HTTP Web server supporting 50 simultaneous user connections
- HTTPS supported (Hyper Text Transfer Protocol Secured)
- Including Windows-based IP Installer and Multi-Viewer software for up to 4 Network Cameras and Network Video Servers
- Integrated email, FTP, DDNS and DHCP client
- Extensive CGI API for software integration and remote programming operations
- Easy-to-use OCX for MS Visual Studio applications
- Including Windows based IP Installer and Multi-Viewer software for up to 16 channels
Specifications
Standards
- IEEE 802.3 (10Base-T Ethernet)
- IEEE 802.3u (100Base-TX Fast Ethernet)
- IEEE 802.3af (Power over Ethernet)
General
- 32-bit ARM9 RISC CPU
- 16 MByte video frame buffer
- 8 Mbyte flash memory
- 32 Mbyte SDRAM
- Supported image resolutions:
- PAL: D1 (720 x 576), VGA (640 x 576), CIF (352 x 288) - NTSC: D1 (720 x 480), VGA (640 x 480), CIF (352 x 240)
- Audio support:
- Full duplex - Bandwidth: 300 Hz to 3.4 KHz - Audio input: 3.5 mm / 1.8" microphone input jack - Audio output: 3.5 mm / 1.8" speaker output jack
- Protocols supported: TCP/IP, UDP, HTTP, FTP, SMTP, DHCP, DNS, ARP, ICMP, RTSP, RTC
- Certifications: FCC Part 15, Subpart B Class A, CE Directive 89/336/EEC (EMC Directive)
PTZ Control
- Selectable baud rate (2400, 4800, 9600 bps)
- Selectable ID (1 – 255)
- Supported protocols: Pelco D/P
- Supported cameras: HONEYWELL HRX-2000, VICON V1311RB-VPS, LG LPT-A100L, SAMSUNG TECHWIN, SAMSUNG ELECTRONICS MRX-1000, INTER-M, DONGYANG UNITECH DRX302A and all other cameras using Pelco-D and P
External IO
- RS-485 port for PTZ control
- DC output for power supply to external device (12 V, 500 mA)
- Sensor input
- Alarm output
LEDs
- Power
- Network connection
- On Air / Network Video Server Active
Environmental
- Dimensions: 142 (W) x 145 (L) x 31 (H) mm (5.6 x 5.7 x 1.2 in.)
- Weight: 1.3 kg (2.8 lbs.)
- Operating temperature: 0 – 50°C (32 – 122°F)
- Operating humidity: 20 – 80% RH, non-condensing
- Storage temperature: 0 – 60°C (0 – 149°F)
System Requirements
- Windows 2000, XP, Vista, Linux, Mac OS X
- Computer with network connection
- Web browser support:
- MS Internet Explorer 5.0 or higher (ActiveX + Java) - Mozilla 1.x, Mozilla Firefox (Java) - Netscape Navigator 6.0 or higher (Java) - Opera (Java) - Safari (Java) - Konqueror (Java)
Power
- External power adapter: 12 V DC, 1.5 A
- Power consumption: 6.0 Watts (maximum)
Package Contents
- Pro Series Network Video Server
- User manual
- External power adapter
- Software CD
|